Product details

$ 19.69
gross price
Tax amount $ 1.79
In Stock
SKU: W458-02
Flair W458 Green / Blue
Please Select A Size Below

Color-shifting pearl-flakes suspended in a transparent base.

Flair Colours are concentrated. Mix with 4050 UVLS Gloss Clear to extend, and thin as needed with 4011 Reducer.
Flair colors are traditionally applied over a black base such as AutoBorne 6002 Sealer Black.
Pearl and metallic colours spray best through a 0.5mm tip-sized airbrush or larger but can be used with a 0.3mm tip when thinned generously, up to 10% per volume with 4011 Reducer.
Air pressure generally upper 20s to 35+ psi.

Pearl-Flake Shifting Colours – Crystal-shaped pearls suspended in a transparent base for application as a mid-coat, most often over a black base, but work well over w die-spectrum of base colours as well. Pearl-flakes may also be mixed with candy2o to make candied pearl colours that are deep and vibrant.

Wicked Colors are fluid acrylic colors with specialized performance for airbrush and spray-gun application.

Wicked is a comprehensive line of water-based, acrylic resin paints made with lightfast pigments.
Wicked Colors are intended for use as interior application and exterior application with a top-coat clear applied over Wicked Colors, such as UVLS Clears.

Wicked Colors are used primarily for use as an airbrush paint, and colors applied with a spray-gun. Wicked Colors can be sprayed out of the bottle, as well as most often thinned with 4011 Reducer added ~ 10% per volume.

Application

Wicked Colors are a multi-surface paint and can be used in a wide variety of applications, and are compatible for use with most any primer, paint and clear type. Always test first before using on an actual project.

Refer to Hard-Surface Application Guide for information on use of Wicked Colors when painting hard surfaces such as plastic, urethane, wood, primer, and other non-porous surfaces or for use as automotive base-coat & graphic paint.

For best adhesion to non-porous surfaces, start with AutoBorne Sealer. Wicked Colors may be applied over AutoBorne Sealer without scuffing, with quicker coverage and drying times compared to applying Wicked Colors direct to substrate.

Mixing Wicked Colors

Wicked Colors may be sprayed with a 0.5mm tip-sized airbrush at 35+ psi out of the bottle, or
may be thinned with 4011 Reducer for smaller airbrush tip-sizes.

Mixing additive 4050 used to extend this range, 4030 not required


Airbrush

Wicked Colors spray well through any airbrush tip-size.
For out-of-the-bottle use, spray with a 0.5mm tip-size ~ 35 psi or more. For use with smaller-tip-sizes and lower psi settings, thin Wicked Colors with 4011 Reducer.

Generally, 4011 Reducer, or other Createx Reducer, is mixed 10% - 20% per volume with Wicked Colors for spraying with an airbrush tip-size of 0.3mm or larger.

For use with smaller tip-sizes, add 4011 Reducer up to 30% per volume.

Add 4011 Reducer in small increments of ~ 5% per volume until paint atomizes into fine particle-size droplets.

Airbrush Tip-Size Quick Guide:
Large, 0.5+ mm. 35+ psi out of the bottle.
Medium, 0.3mm.+Reduce 15% - 20% per vol.
Small, 0.2mm or less Reduce 25% + per vol.

Add reducer in small increments in a mixing cup.

Allow 10+ minutes for paint mix to acclimate before spraying.


Spray-Gun

Wicked Colors spray best with a spray-gun when mixed with 4011 Reducer
thin 10% – 20% per volume with 4011 Reducer.

Spray-Gun tip-size: 1.2mm – 1.3mm
Spray at gun manufacturer’s inlet psi specification.
4011 Reducer is the standard thinner for all Createx paints including Wicked Colors.

Allow reduced mix 10+ minutes to acclimate before spraying as reduced breaks down water surface tension for improved flow.

Drying and Cure Times

Times set at ~ 70⁰F (21⁰C), 50% Humidity.
Allow for more dry time in cooler or more humid conditions.

Minimum Dry Times:
Re-Coat Time: 10 – 15 minutes
Time to Tape: 45 – 60 minutes
Time to Clear: 60 minutes

Use warm, dry air to assist drying.
Do not force cure with heat; doing so will affect adhesion.

Full cure is after 48-hours.
Do not water-submerge before paint has fully cured.

Sanding

Dry sand only. Sanding not required prior to top-coating with clear or other paint type.
Wicked Colors shave best when sanded with 800 - 1000 grit sandpaper.

Compatibility

Wicked Colors are compatible with all other Createx paints and clears. Wicked Colors are also generally compatible with any other type of water-based and solvent-based paint.

When using Wicked Colors with solvent-based paints & clears, allow each to cure, (dry thoroughly for an extended period of at least 1 hour), prior to applying the next paint-type.  Water-based and solvent-based may only be inter-coated, not directly mixed.

Always make a test panel prior to using a new paint, primer,
cleaner or clear. A test panel is the best way to determine whether any compatibility issues exist between materials.

Storage & Shelf-Life After Reducing Paint

Best practice is to only thin Wicked Colors with
4011 Reducer, or other Createx Reducers, in amounts that will be sprayed within 24-hours after mixing.
Although Wicked Colors do not have a true pot-life after reducing, (i.e. are not a reactive paint-mix which, at some point after, become unusable), there is an eventual loss of spray-performance due to an increase in viscosity of paint as it loses water through evaporation and flashing of solvent (alcohol) from Wicked + Reducer mix.

Keeping paint air-capped air-tight, at all times unless actually pouring paint from the bottle, minimizes.

Mixing Wicked Colors with 4030 Balancing Clear or 4050 UVLS Gloss Clear does not promote loss of water-content when mixed, its only when 4011 Reducer or other reducers are added that shelf-life is shortened.

Best practice is to strain this mix with a 190-micron mesh strainer, then thin with 4011 Reducer.
Cleaning from Airbrush or Spray-Gun

Wicked Colors are best rinsed from the airbrush or spray-gun with 5618 Airbrush Cleaner or 4011 Reducer. Use 4008 Restorer as a rinse for final clean to remove dried paint from airbrush or spray-gun. Rinse with water after.

Cleaning Wicked Colors With a solvent-Based Degreaser

Wicked Colors should only be cleaned after the paint has thoroughly dried, best 48 hours. Use a solvent-based degreaser or odorless mineral spirits to clean Wicked Colors.

Health & Safety

Use in a well-ventilated area.  Avoid contact with eyes. Wash hands thoroughly with soap and warm water after use.  Do not ingest. When spraying or sanding, use a properly fitting NIOSH approved respirator per the manufacturer’s instructions. Eye contact: Rinse with clean water for 15 minutes.  Seek medical attention. Inhalation: Use in in well ventilated areas and wear a NIOSH approved respirator. Refer to Wicked Colors SDS for additional information.

Freight

This product is postable: Airbrush Megastore uses Australia Post as our delivery option.

Up to 5kg options:

Express Post (No Insurance for loss or damage)

Express Post (Insured)

Australia Post Road (No Insurance for loss or damage)

Australia Post Road (Insured)

Cartons exceeding 5kg options:

Australia Post Road (No Insurance for loss or damage)

Australia Post Road (Insured)

*Note if no insurance is selected by the purchaser then they are not covered for any damages or loss, Airbrush Megastore packs all orders in bubble wrap in cardboard containers / boxes with sufficient packaging including Fragile Label.