Product: 4011 Reducer

.

The go-to, recommended thinner for all Createx paints and clears. 4011 is a water-based thinner used to lower viscosity and promotes faster drying times and complete curing. 4011 is generally added 5% - 10% per volume to paint.

Note:

Airbrush Megastore is in no way legally responsible for this product if Iso-Propyl Alcohol is added by the customer, if intending on adding Iso-Propyl Alcohol please refer to your councils regulations for flammable goods usage and storage, by adding Iso-Propyl Alcohol do not use or keep by naked flames and store in a flame proof cabinet.

Keep away from children, do not inhale, use a noish approved mask in a ventilated area, seek your council regulations. Suitable to use in all Illustration Colors lines

May be used as an intercoat clear where the artist may wish to protect the artwork to a certain stage, a couple light coats is all that is required, use to thin Createx Illustration Colors / Bloodline Colors / Lifeline Colors / Illustration Opaques.

Water-based primer for latex and flexible substrates.
Helps prevent paint peeling or delaminating when painting onto latex products and other flexible substrates.
Compatible with Createx Illustration Colors / Wicked Colors & Createx Airbrush Colors.
Dries to a tacky clear coating over which paint can be applied, prepare surface by cleaning all oils and dirt,scuffing not required.

Product: 5618 Cleaner

.

A mild, water-based cleaner for rinsing all Createx Branded colours out of airbrush. May be replaced by use of 4011 Reducer as cleaner while painting. To remove dried paint inside of airbrush after painting, use 4008 Restorer

Product: 4030 Balancing Clear / Mixing Additive

.

Water-based, urethane clear used as

1) flow & adhesion enhancer added ~ 10% per volume to Createx branded paints / not intended for Autoborne Sealer or Wicked Opaques.

2) carrier for candy2o for airbrush applications. May also be used as inter-coat, although UVLS Clears are best Createx inter-coat for taping over.

4030 has a pot life when added to colours of up to max 48hrs, do not return mixed paints with 4030 to your bottle as it will set the entire bottle off.

Product: 4008 Restorer

.

A biodegradable cleaner for soaking metallic airbrush & spray-gun parts in to remove cured paint. Use after painting to partially dissolve dried all Createx Branded paint for easy clean-up with soap & water.